This image represents a finished sample approximately 600mm wide. Colours displayed on your screen may differ from those of the actual sample. This veneer is made from natural wood so its colour may vary from batch to batch.
TrueGrain Rustico
Veneer: |
TrueGrain Rustico |
Cut: |
Quarter-cut
Only available in Quarter-cut type appearance |
Matching: |
Slip-matched
Should always be specified as Slip-matched |
About this Product: |
This is a "TrueGrain Natural" veneer made from undyed veneer of the same species as the veneer name |
How to Specify: |
Download |
Nominal veneer leaf size(s): |
2500mmx200mm |
Typical Finished Panel size(s): |
2400mmx200mm |
Thickness of Veneer: |
0.7mm |
Product Data Sheet: |
Download
|
Availability: |
Good availability |
Price zone: |
Slightly above average |
Applications: |
Not to be used on exterior or wet areas, or ultra-high-wear areas or floors. Keep out of direct sunlight. |
About & Applications information: |
Download
|
Colour/Appearance: |
Pale/Blond/Golden
- Made from natural undyed Radiata Pine - colour may vary slightly from batch to batch. Grain is consistent. |
Consistency of Appearance: |
Considerably better than average |
Made from: |
Undyed Radiata Pine |
Botanical Name: |
Pinus radiata |
Origin: |
Australia |
Handling and Care instructions |
Download
|
Edging & solid timber availability: |
Veneer edging is generally available from Briggs Veneers. Matching solid wood is not available. |
Finish: |
This veneer should be finished with a non-yellowing clear coating, such as a 2-pack Acrylic Urethane, with manufacturer approved UV inhibitors |
Pressing, Finishing & Fabrication information |
Download
|
Environmental: |
Sustainably managed, non-endangered |
Environment Health & Safety information |
Download
|
Available as environmentally certified: |
No
|
Emissions from raw veneer: |
Low Formaldehyde E1 |
Formaldehyde certificate |
Download
|
Material Safety Data Sheet |
Download
|
This/these fire certificate(s) apply only for the MDF, species, veneers, laminates and thicknesses as listed on the certificates. Please confirm with your fire consultant that these certificates meet the relevant BCA requirements for your application (interior walls and ceilings Class 2 to 9 Buildings).