This image represents a sample approximately 600mm wide. Colours displayed on your screen may differ from those of the actual sample. This laminate is made from natural wood so its appearance may vary and have natural features.

Oberflex Bog Oak


Oberflex Bog Oak



Only available in Quarter-cut



Available as Random-matched only
About this Product: Cannot be post-formed, but can be cold bent perpendicular to the grain, to a radius of approximately 250mm
How to Specify: Download
Laminate sheet size(s): 3050mmx1270mm (and 2520mmx1270mm by indent)
Typical Finished Panel size(s): 3000mmx1200mm
Thickness of laminate: 1mm
Product Data Sheet: Download
Availability: Good availability
Price zone: Slightly above average
Applications: Exceptionally good for high wear areas where stain resistance is required - such as reception counters, or tables used for food and drink. Not for exterior or wet areas, or floors. Keep out of direct sunlight.
About & Applications information: Download
Colour/Appearance: Black/Dark
- Natural variation in colour can occur between different logs and batches.
Consistency of Appearance: Better than average
Made from: Resin impregnated American Oak veneer, with a dark wash - finished with a hard melamine surface and bonded onto a laminate backer
Handling and Care instructions Download
Edging & solid timber availability: Pre-finished unglued veneer edge-strips are available from Briggs. The side of the edge-strips must be sealed with a lacquer pen or similar.
Finish: Prefinished - Matt. Wire-brushed texture
Pressing, Finishing & Fabrication information Download
Environmental: Sustainably managed, non-endangered
Environment Health & Safety information Download
Available as environmentally certified: No
Emissions from laminate: : Formaldehyde - Less than 0.13 mg/m3 Formaldehyde = E1
Formaldehyde certificate Download
VOC emissions certificate: Download
Material Safety Data Sheet Download
Fire Hazard Group 2 when glued onto 12mm and thicker FLAMEBLOCK LIGHT FRMDF and FLAMEBLOCK FRMDF Download Fire Hazard Group 2 certificate
Fire Hazard Group 3 when glued onto 12mm and thicker MDF, MRMDF and BLACK MRMDF. Download Fire Hazard Group 3 certificate

This/these fire certificate(s) apply only for the MDF, species, veneers, laminates and thicknesses as listed on the certificates. Please confirm with your fire consultant that these certificates meet the relevant BCA requirements for your application (interior walls and ceilings Class 2 to 9 Buildings).