This image represents a sample approximately 600mm wide. Colours displayed on your screen may differ from those of the actual sample. This laminate is made from natural wood so its appearance may vary and have natural features.
Oberflex Spice Sesame
Product: |
Oberflex Spice Sesame |
About this Product: |
Cannot be post-formed, but can be cold bent perpendicular to the grain, to a radius of approximately 300mm |
How to Specify: |
Download |
Laminate sheet size(s): |
2500mmx1250mm, 3050mmx1250mm |
Typical Finished Panel size(s): |
2400mmx1200mm, 3000mmx1200mm |
Thickness of laminate: |
1.1mm |
Product Data Sheet: |
Download
|
Availability: |
Good availability |
Price zone: |
Considerably above average |
Applications: |
Exceptionally good for high wear areas where stain resistance is required - such as reception counters, or tables used for food and drink. Not for exterior or wet areas, or floors. Keep out of direct sunlight. |
About & Applications information: |
Download
|
Colour/Appearance: |
Patterned
- Natural variation in colour can occur between different logs and batches. |
Consistency of Appearance: |
Better than average |
Made from: |
Resin impregnated Sycamore veneer, with a striped & stained surface - finished with a hard melamine surface and bonded onto a laminate backer |
Handling and Care instructions |
Download
|
Edging & solid timber availability: |
Self-edge with same laminate. The side of the edge-strips must be sealed with a lacquer pen or similar. |
Finish: |
Prefinished - Matt. Wire-brushed texture |
Pressing, Finishing & Fabrication information |
Download
|
Environmental: |
Sustainably managed, non-endangered |
Environment Health & Safety information |
Download
|
Available as environmentally certified: |
No
|
Emissions from laminate: : |
Formaldehyde - Less than 0.13 mg/m3 Formaldehyde = E1 |
Formaldehyde certificate |
Download
|
VOC emissions certificate: |
Download
|
Material Safety Data Sheet |
Download
|
This/these fire certificate(s) apply only for the MDF, species, veneers, laminates and thicknesses as listed on the certificates. Please confirm with your fire consultant that these certificates meet the relevant BCA requirements for your application (interior walls and ceilings Class 2 to 9 Buildings).